Controlling The Image Finishing Tone; Custom Image - Ricoh pentax KP Operating Manual

Controlling the Image Finishing Tone

When you want to take pictures with a slightly different style,
you can set the desired picture style before shooting.
Try out the various settings, and find your best picture style.

Custom Image

3
1
Select [Custom Image] in the A1 or C1 menu
and press D.
The Custom Image setting screen appears.
2
Select an image finishing
tone.
Auto Select
Bright
Natural
Portrait
Landscape
Vibrant
Radiant
Available operations when shooting with the
viewfinder
X Uses Digital Preview to preview the
background image with the selected setting
applied.
Z Saves the preview image (only when the
image can be saved).
Proceed to Step 6 when [Auto Select] is selected or if you
do not need to change the parameters.
3
Press G.
The parameter setting screen appears.
74
A1/C1
Bright Bright
±0 ±0 ±0 ±0 ±0 +1 +1 +1 +1 ±0
Parameter Adj. Parameter Adj.
Cancel Cancel Check Check OK OK
Muted
Flat
Bleach Bypass
Reversal Film
Monochrome
Cross Processing
4
Set the parameters.
Available operations
Selects a parameter.
AB
Adjusts the value.
CD
Switches between [Contrast], [Highlight
Q
Adjustment], and [Shadow Adjustment].
Switches between [Sharpness], [Fine
R
Sharpness], and [Extra Sharpness]. (Not
available in C mode.)
Resets the adjustment value to the default
M
setting.
5
Press F.
The screen of Step 2 reappears.
The adjustment values for parameters are displayed.
6
Press F twice.
The camera returns to standby mode.
u Caution
• In R mode, [Custom Image] is fixed to [Auto Select].
• The Digital Preview operation in Step 2 is disabled when the
drive mode is set to [Mirror Lock-up Shooting], [Multi-
exposure], or [Interval Shooting].
• When [Custom Image] is assigned to the function dial, you
can change the image finishing tone using the Smart
Function. (p.21, p.105) By default, [Custom Image] is
assigned to C1.
Saturation Saturation
Cancel Cancel Reset Reset OK OK