Fax Settings only for M053 model
Initializing the Fax unit
When you press the Fax key for the first time after installation, the error "SRAM problem
occurred / SRAM was formatted" will show on the LCD for initializing the program of the fax unit.
Turn the main power switch off/on to clear the error display.
If another error occurs after initialization, this can be a functional problem.
1.
Select fax SP1-101-016 and specify the country code.
2.
Select fax SP3-101-001 and specify the service station.
When Using an Smart Card Reader
If a customer wants to use a smart card reader, follow the installation procedure below. The
smart card reader must be placed on the specific place. If not, some antenna or transmitter in
the main machine may be interrupted.
1.
ARDF rear cover (
2.
Attach the smart card reader [A].
1.
Release the hook, and then put the cable outside.
SM
p.4-88)
2-9
Copier
M052/M053/M054