Ricoh M052 Service Manual page 397

Scanner Service Mode
1011 [Org Count Display]
1011 1 This SP codes switches the original count display on/off.
1012 [User Info Release]
This SP code sets the machine to release or not release the following items at
job end.
Destination (E-mail/Folder/CS)
1012 1 Sender name
Mail Text
Subject line
File name
1013 [Scan to Media Setting]
This SP code enables/disables the multi-media function option (USB 2.0/SD
Slot) mounted on the left rear corner of the machine. Operators can scan
1013 1
documents to either an SD card or a USB memory device inserted into this unit.
This SP must be enabled (set to "1") in order for the device to function.
M052/M053/M054
[0 or 1 / 0 / - ]
*CTL
0: No display, 1: Display
[0 or 1 / 1 / - ]
*CTL
0: Do not release, 1: Release
[0 or 1 / 1 / - ]
*CTL
0: Disable, 1: Enable
5-184 SM