Ricoh M052 Service Manual page 616

Address
680583
To Not used
6805A0
Acceptable CED detection
6805A1
frequency upper limit (high byte)
Acceptable CED detection
6805A2
frequency upper limit (low byte)
Acceptable CED detection
6805A3
frequency lower limit (high byte)
Acceptable CED detection
6805A4
frequency lower limit (low byte)
6805A5 CED detection time
Acceptable CNG detection
6805A6
frequency upper limit (high byte)
Acceptable CNG detection
6805A7
frequency upper limit (low byte)
Acceptable CNG detection
6805A8
frequency lower limit (high byte)
Acceptable CNG detection
6805A9
frequency lower limit (low byte)
6805AA
Not used
6805AB CNG on time
6805AC CNG off time
Number of CNG cycles required
6805AD
for detection
SM
Function
-
BCD (Hz)
BCD (Hz)
20 ms ± 20
ms
BCD (Hz)
BCD (Hz)
-
20 ms
20 ms
-
113
Unit Remarks
Do not change the
settings.
If both addresses
contain FF(H), tone
detection is disabled.
If both addresses
contain FF(H), tone
detection is disabled.
Factory setting: 200 ms
If both addresses
contain FF(H), tone
detection is disabled.
If both addresses
contain FF(H), tone
detection is disabled.
Do not change the
setting.
Factory setting: 500 ms
Factory setting: 3000 ms
The data is coded in the
same way as address
680533.
NCU Parameters
M381