Specifying The Size Of Paper For Printing Copies; Configuring The Fax Settings - Ricoh SP C240SF Operating Instructions Manual
Hide thumbs
Also See for SP C240SF:
- User manual (456 pages) ,
- Initial manual (254 pages) ,
- Quick manual (2 pages)
Table of Contents
Advertisement
8. Configuring the Machine Using Web Image Monitor
• The information about tray 2 appears only when it is installed.
Specifying the Size of Paper for Printing Copies
Click the [Copier] tab on the system settings page to specify the size of paper for printing copies.
Select Paper
Item
Select Paper
8
• If tray 2 is not installed, only [Tray 1] and [Bypass Tray] appear.
• For details about the priority tray settings, see p.321 "Specifying the Priority Tray".
Configuring the Fax Settings
Click the [Fax] tab on the system settings page to configure the fax settings.
318
Select the paper size used for printing copies from the following: [Tray 1],
[Tray 2], [Bypass Tray], [A4], or [8 1/2 × 11].
When a tray is selected, the machine prints from that tray only. When a
paper size is selected, the machine prints from the tray that contains the
paper of the specified size, except the bypass tray. If tray 1 and tray 2 both
contain the paper of the specified size, the machine starts to print from the
tray specified as the priority tray for [Copier] in the [Priority Tray] page. If
that tray runs out of paper, the machine automatically switches to the other
tray to continue printing.
Description
Advertisement
Table of Contents
