Installation Procedure; Copier Settings - Ricoh M052 Service Manual

Copier

2.3.2 INSTALLATION PROCEDURE

Make sure that the copier remains unplugged during installation.

Copier settings

1. Remove the plastic bag.
2. Lift the machine by the inset grips on its sides.
At least four people are needed to lift the machine.
3. Lower the machine slowly and carefully to prevent trapping your hands.
4. Remove the adhesive tape attached on the machine's exterior.
5. Only for M054 model, do the following steps from 1) and 2).
1) Pull out tray 1 [A], and then remove the extender [B] for the internal finisher from tray
1.
M052/M053/M054 2-6 SM