Update Procedure - Ricoh M052 Service Manual

Controller Options
17. Press the hard key that you want to use for the Browser Unit. As a default, this function is
assigned to the "Other Functions" key (the bottom key of the function keys).
18. Touch "OK".
19. Touch "Exit" twice to go back to the copy screen.
20. Turn off the main power switch.
21. Install the key top for "Browser Unit" to the key slot on the operation panel where you want.
22. Remove the SD card from the SD slot 2.
23. Attach the slot cover [A] (
24. Keep the SD card in a safe place after you install the application program from the card to
HDD. This is because that the SD card can be the only proof that the user is licensed to use
the application program. You may need to check the SD card and its data to solve a
problem in the future.
25. Turn off and on the machine.

Update Procedure

1. Remove the SD slot cover for SD slots (
2. Turn the SD-card label face to the right (rear view), then push it slowly into the SD slot 2
until you hear a click.
3. Plug in and turn on the main power switch.
4. Push the "User Tools" key.
If an administrator setting is registered for the machine, step 5 and 6 are required.
Otherwise, skip to step 7
5. Push the "Login/ Logout" key.
6. Login with the administrator user name and password.
7. Touch "Extended Feature Settings" twice on the LCD.
8. Touch "Uninstall" on the LCD.
9. Touch the "Browser" line
10. Confirmation message appears on the LCD.
11. Touch "Yes" to proceed.
12. Reconfirmation message appears on the LCD.
13. Touch "Yes" to uninstall the browser unit.
14. You will see "Uninstalling the extended feature... Please wait.", and then "Completed".
15. Touch "Exit" to go back to the setting screen.
16. Exit "User/Tools" setting, and then turn off the main power switch.
17. Remove the SD card from SD slot 2.
18. Overwrite the updated program in the "sdk" folder of the browser unit application with PC.
19. Do the "Installation Procedure" to install the browser unit.
M052/M053/M054
x 1).
x 1).
2-38 SM