Ricoh M052 Service Manual page 288

Default for JPEG
Sets the JPEG format default for documents sent to the document
091
management server via the MLB with JPEG selected as the format.
Enabled only when optional MLB (Media Link Board) is installed.
101 Primary srv IP address
102 Primary srv scheme
Primary srv port
103
number
104 Primary srv URL path
Secondary srv IP
111
address
112 Secondary srv scheme
Secondary srv port
113
number
Secondary srv URL
114
path
Default Reso Rate
120
Switch
Reso: Copy (Mono)
Selects the resolution for BW copy mode. This is basically adjusted by the
122
remote system.
0: 600dpi/ 1: 400dpi/ 2: 300dpi/ 3: 200dpi/ 4: 150dpi/ 5: 100dpi
SM
[5 to 95 / 50 / 1 /step]
Sets the IP address for the primary capture server.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
Sets the IP address for the secondary capture
server. This is basically adjusted by the remote
system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
This is basically adjusted by the remote system.
[0 to 5 / 3 / 1/step]
5-75
System SP5-xxx
M052/M053/M054