Ricoh M052 Service Manual page 313

System SP5-xxx
5967 [Copy Server Set Function]
Enables and disables the document server. This is a security measure that
prevents image data from being left in the temporary area of the HDD. After
changing this setting, you must switch the main switch off and on to enable the
new setting.
[Cherry Server]
5974
Specifies which version of ScanRouter, "Lite" or "Full", is installed.
001 Cherry Server
[Device Setting]
The NIC and USB support features are built into the GW controller. Use this
5985
SP to enable and disable these features. In order to use the NIC and USB
functions built into the controller board, these SP codes must be set to "1".
001 On Board NIC
002 On Board USB
M052/M053/M054
*CTL 0: ON, 1: OFF
*CTL [0 or 1 / 0 / – ] 0: Lite, 1: Full
[0 to 2 / 0 / 1 /step]
0: Disable, 1: Enable, 2: Function limitation
When the "Function limitation" is set, "On board
NIC" is limited only for the NRS or LDAP/NT
authentication.
Other network applications than NRS or
LDAP/NT authentication are not available
when this SP is set to "2". Even though
you can change the initial settings of those
network applications, the settings do not
work.
[0 or 1 / 0 / 1/step]
0: Disable, 1: Enable
5-100 SM