Move Exec - Ricoh M052 Service Manual

Controller Options

Move Exec

The menu "Move Exec" (SP5-873-001) lets you copy application programs from the original SD
card to another SD card.
Do not turn ON the write protect switch of the system SD card or application SD card
on the machine. If the write protect switch is ON, a download error (e.g. Error Code 44)
occurs during a firmware upgrade or application merge.
1. Turn the main switch off.
2. Make sure that an SD card is in SD slot 1 (upper slot). The application program is copied to
this SD card.
3. Insert the SD card with the application program in SD slot 2 (lower slot). The application
program is copied from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec".
7. Follow the messages shown on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD slot 2 (lower slot).
10. Turn the main switch on.
11. Check that the application programs run normally.
M052/M053/M054 2-28 SM