Ricoh M052 Service Manual page 250

[Mode Clear Opt. Counter
5120
Removal]
This program updates the information on the optional counter. When you install
001
or remove an optional counter, check the settings.
5121 [Counter Up Timing]
This program specifies when the counter goes up. The settings refer to "paper
001
feed" and "paper exit" respectively.
5127 [APS Mode]
001 This program disables the APS.
5162 [App. Switch Method]
001 This program specifies the switch that selects an application program.
[Fax Printing Mode at Optional]
Enables or disables the automatic print out without an accounting device. This
5167
SP is used when the receiving fax is accounted by an external accounting
device.
Fax Printing Mode at
001
Optional Counter Off
SM
[0: Yes (removed)/ 1: Standby (installed but
*CTL
not used)/ 2: No (not removed)]
*CTL [0: Feed/ 1: Exit]
*CTL [0: Not disabled/ 1: Disabled]
*CTL [0: Soft Key Set/ 1: Hard Key Set]
[0 or 1 / 0 / - ]
*CTL 0: Automatic printing
1: No automatic printing
5-37
System SP5-xxx
M052/M053/M054