Move Exec - Ricoh M052 Service Manual

SD Card Appli Move

5.15.2 MOVE EXEC

The menu "Move Exec" (SP5-873-001) lets you copy application programs from the original SD
card to another SD card.
Do not turn ON the write protect switch of an application SD card on the machine. If the
write protect switch is ON, a download error (e.g. Error Code 44) occurs during a
firmware upgrade or application merge.
1. Turn the main switch off.
2. Make sure that an SD card is in SD slot 1 (upper slot). The application program is copied
into this SD card.
3. Insert the SD card (having stored the application program) to SD slot 2 (lower slot). The
application program is copied from this SD card.
4. Turn the main switch on.
5. Start the SP mode.
6. Select SP5-873-001 "Move Exec."
7. Follow the messages shown on the operation panel.
8. Turn the main switch off.
9. Remove the SD card from SD slot 2 (lower slot).
10. Turn the main switch on.
11. Check that the application programs run normally.
M052/M053/M054 5-198 SM