Ricoh M052 Service Manual page 558

System Switch 1A [SP No. 1-101-027]
No. FUNCTION
LS RX memory remaining
0-7
refresh value setting
System Switch 1B - Not used (do not change these settings)
System Switch 1C - Not used (do not change these settings)
System Switch 1D [SP No. 1-101-030]
No FUNCTION
RTI/CSI/CPS code display
0 0: ON
1: OFF
1-7
Not used
SM
COMMENTS
Sets a value of 4K.
If the amount of memory remaining falls below 4K,
documents received in memory are printed to
create more space in memory.
Initial value: 0x80 (512K)
00-FF (0-1020 KB: Hex)
NOTE: If a customer wants available memory size
larger, decrease this threshold.
COMMENTS
0: RTI, CSI, CPS codes are displayed on the top
line of the LCD panel during communication.
1: Codes are switched off (no display)
Do not change these settings.
55
Bit Switches
M381