Installing The Shift Lever - Yamaha YFM7FGPW Service Manual

È
É
CRANKCASE
3. Fit the right crankcase onto the left crank-
case. Tap lightly on the case with a soft
hammer.
CAUTION:
_
Before installing and torquing the crank-
case holding bolts, be sure to check
whether the transmission is functioning
properly by manually rotating the shift
drum in both directions.
4. Install:
• lead holder
• crankcase bolts
5. Tighten:
• crankcase bolts
(follow the proper tightening sequence)
È Right crankcase
É Left crankcase
NOTE:
_
Tighten the bolts in stages, using a crisscross
pattern.
6. Apply:
• 4-stroke engine oil
(to the crankshaft pin, bearing and oil deliv-
ery hole)
7. Check:
• crankshaft and transmission operation
Unsmooth operation → Repair.

INSTALLING THE SHIFT LEVER

1. Install:
• shift lever 2 assembly 1
• shift lever 1 2
NOTE:
When installing the shift lever 1, align the
punch mark a on the shift lever 1 with the
punch marks b on the shift lever 2.
4 - 74
ENG
10 Nm (1.0 m · kg, 7.2 ft · lb)
14 Nm (1.4 m · kg, 10 ft · lb)