Adjusting The Speed Limiter - Yamaha YFM7FGPW Service Manual

ADJUSTING THE SPEED LIMITER

EBS00053
ADJUSTING THE SPEED LIMITER
The speed limiter keeps the throttle from
becoming fully-opened even when the throttle
lever is applied to the maximum position.
Screwing in the adjusting screw stops the
engine speed from increasing.
1. Measure:
2. Adjust:
M
a. Loosen the locknut 1.
b. Turn the adjuster 2 in direction b or c
c. Tighten the locknut.
_
• Particularly for a beginner rider, the
• For proper throttle lever operation do not
L
3 - 22
• speed limiter length a
Out of specification → Adjust.
Speed limiter length
Less than 12 mm (0.47 in)
• speed limiter length
MMM M MMM M M MMM M M MMM M
until the specified speed limiter length is
obtained.
Speed limiter length is
Direction b
decreased.
Speed limiter length is
Direction c
increased.
WARNING
speed limiter should be screwed in com-
pletely. Screw it out little by little as their
riding technique improves. Never remove
the speed limiter for a beginning rider.
turn out the adjuster more than 12 mm
(0.47 in). Also, always adjust the throttle
lever free play to 3.0 ~ 5.0 mm (0.12 ~
0.20 in).
LLL L LLL L L LLL L L LLL L
CHK
ADJ
M MMM M M MMM M MMM
L LLL L L LLL L LLL