Instrument Functions - Yamaha YFM7FGPW Service Manual

3
2
1
7
4 5
6
1 - 6
FEATURES

INSTRUMENT FUNCTIONS

EBU27291
Multifunction display
1 "CLOCK" button
2 "RESET" button
3 "SELECT" button
4 Speedometer
5 Fuel meter
6 Clock/Hour meter
7 Odometer/Tripmeter A/Tripmeter B
The multifunction display is equipped with the
following:
• a speedometer (which shows the riding
speed)
• an odometer (which shows the total dis-
tance traveled)
• two tripmeters (which show the distance
traveled since they were last set to zero)
• a clock
• an hour meter (which shows the total time
the key has been turned to "ON")
• a fuel meter
• a self-diagnosis device
Odometer and tripmeter modes
Pushing the "SELECT" button switches the
display between the odometer mode "ODO"
and the tripmeter modes "A" and "B" in the fol-
lowing order:
ODO → TRIP A → TRIP B → ODO
To reset a tripmeter, select it by pushing the
"SELECT" button, and then push the "RESET"
button for at least three seconds. The tripme-
ters can be used to estimate the distance that
can be traveled with a full tank of fuel. This
information will enable you to plan future fuel
stops.
NOTE:
Holding in the "SELECT" button and then turn-
ing the key to "ON" switches the display
between "mph" and "km/h".
GEN
INFO