Yamaha YFM7FGPW Service Manual page 117

1
2
1
CHANGING THE COOLANT
2. Remove:
• coolant reservoir cap 1
3. Disconnect:
• coolant reservoir hose 2
4. Drain:
• coolant
(from the coolant reservoir)
5. Connect:
• coolant reservoir hose
6. Remove:
• radiator cap 1
1
_
A hot radiator is under pressure. Therefore,
do not remove the radiator cap when the
engine is hot. Scalding hot fluid and steam
may be blown out, which could cause seri-
ous injury. When the engine has cooled,
open the radiator cap as follows:
Place a thick rag or a towel over the radia-
tor cap and slowly turn the radiator cap
counterclockwise toward the detent to
allow any residual pressure to escape.
When the hissing sound has stopped,
press down on the radiator cap and turn it
counterclockwise to remove.
7. Remove:
• coolant drain bolt 1
(along with the copper washer)
8. Drain:
• coolant
(from the engine and radiator)
9. Check:
• coolant drain bolt 1
Damage → Replace.
10.Install:
• copper washer 2
• coolant drain bolt
3 - 36
WARNING
New
10 Nm (1.0 m · kg, 7.2 ft · lb)
CHK
ADJ