Yamaha YFM7FGPW Service Manual page 132

BLEEDING THE HYDRAULIC BRAKE SYSTEM/ADJUSTING THE
SELECT LEVER CONTROL CABLE AND SHIFT ROD
1
4
2
3
6
k. Fill the brake master cylinder reservoir to
_
After bleeding the hydraulic brake system,
check the brake operation.
L LLL
3. Install:
• rear wheel
EBS00100
ADJUSTING THE SELECT LEVER
CONTROL CABLE AND SHIFT ROD
5
1 NEUTRAL
2 HIGH
3 LOW
4 REVERSE
5 PARK
7
6 Control cable
7 Select lever shift rod
_
Before moving the select lever, bring the
vehicle to a complete stop and return the
throttle lever to its closed position. Other-
wise the transmission may be damaged.
1. Adjust:
• brake pedal free play
2. Remove:
• left side panel
3 - 51
the proper level with the recommended
brake fluid.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
L LLL L L LLL L L LLL L
Refer to "FRONT AND REAR WHEELS" in
chapter 8.
WARNING
Refer to "ADJUSTING THE REAR BRAKE".
Refer to "SEAT AND SIDE PANELS".
CHK
ADJ
L LLL L L LLL L LLL