Yamaha YFM7FGPW Service Manual page 386

a
b
e
STEERING SYSTEM
4. Install:
• collar D
d
• steering stem joint E
c
• steering stem joint bolts F
NOTE:
• Apply LOCTITE
bolts.
• Align the spline a on the steering stem with
the groove b in the steering stem joint.
• Align the punch mark c on the EPS unit with
the groove d in the steering stem joint.
5. Tighten:
• steering stem bracket bolts G
NOTE:
Apply LOCTITE
bolts.
• steering stem bearing bolts H
NOTE:
Apply LOCTITE
bolts.
• steering stem joint bolts F
6. Tighten:
• steering stem bolts C
NOTE:
• Bend the lock washer tab e along a flat side
of the bolt.
• Pass the cable and hoses through the cable
e
guide. Refer to "CABLE ROUTING" in chap-
ter 2.
8 - 39
(temporarily tighten)
®
to the steering stem joint
50 Nm (5.0 m · kg, 36 ft · lb)
®
to the steering stem bracket
50 Nm (5.0 m · kg, 36 ft · lb)
®
to the steering stem bearing
30 Nm (3.0 m · kg, 22 ft · lb)
23 Nm (2.3 m · kg, 17 ft · lb)
CHAS