Yamaha YFM7FGPW Service Manual page 446

Hide thumbs Also See for YFM7FGPW:
Table of Contents

Advertisement

EBS01083
6. The coolant temperature warning light does
not come on when the main switch is set to
"ON", or if the coolant temperature warning
light does not come on when the tempera-
ture is high (more than 112 °C (233.6 °F)).
EBS00812
1. Coolant temperature sensor
• Remove the coolant temperature sensor
from the cylinder head.
• Connect the pocket tester (Ω × 100) to the
coolant temperature sensor 1 as shown.
• Immerse the coolant temperature sensor
in a container filled with coolant 2.
NOTE:
_
Make sure the coolant temperature sensor
terminals do not get wet.
• Place a thermometer 3 in the coolant.
• Slowly heat the coolant, and then let it cool
to the specified temperature indicated in
the table.
• Measure the coolant temperature sensor
resistance.
Coolant temperature sensor
resistance
290 ~ 354 Ω at 80 °C (176 °F)
WARNING
_
• Handle the coolant temperature sensor
with special care.
• Never subject the coolant temperature
sensor to strong shocks. If the coolant
temperature sensor is dropped, replace
it.
Coolant temperature sensor
18 Nm (1.8 m · kg, 13 ft · lb)
SIGNALING SYSTEM
• Does the coolant temperature sensor
operate properly?
YES
9 - 41
+
ELEC
NO
Replace the coolant
temperature sensor.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Yfm7fgpw 2007

Table of Contents