Regal 42SC Owner's Manual page 82

Systems
TYPICAL MAIN DC PANEL METER/SWITCH FUNCTIONS
DC AMPS
DC VOLTS
CO
The typical main DC control panel is located in the aft
starboard salon behind the overhead cabinet doors. This
panel is protected by the cabin main breaker at the battery
management center. The panel features an analog 12 volt
DC volt meter and amp meter to monitor electrical fl ow
and current. These 2 instruments can be valuable aids in
basic electrical troubleshooting.
A triple generator switch cluster facilitates gen-set opera-
tions. A 3 amp in-line fuse located on the rear side of the
panel protects the blue soft indicator icon for each break-
er. Notice the CO and macerator covered breakers. These
switches require a 2 step operation to actuate the compo-
nent. The cover must be lifted before the switch can be
activated. For more information read the sections on car-
bon monoxide and pumping waste overboard. Macerator
usage requires the same 2 step process.
Refer to the technical section for breaker size informa-
tion.
29