Regal 42SC Owner's Manual page 207

NOTICE
AVOID EQUIPMENT DAMAGE!
KEEP THE WASHER-DRYER
AND CABINET DOORS CLOSED
WHILE THE VESSEL IS IN MOTION.
USE THE WASHER-DRYER ONLY
WHEN THE VESSEL IS STOPPED.
Setting delay start
Use the DELAY START option on the washer-dryer
to delay the start of any wash program by 12, 9, 3, or 1
hour.
• With the washer-dryer power OFF, turn the PROGRAM
SELECTOR KNOB (A) clockwise to one of the 4 delay
start positions (12, 9, 3, or 1).
• Press the ON/OFF button (I). The STATUS/DOOR
LOCK lamp will fl ash slowly for 5 seconds and then stays lit
to indicate that the delay time has been accepted. Now you
can turn the knob clockwise to the program you desire.
• The STATUS/DOOR LOCK lamp (L) has a particular
fl ashing motion (2 seconds on and 4 seconds off) to indicate
that a delayed start has been set. During this phase, you can
open the appliance door and change the washing load.
Note: After the wash cycle has been set and accepted by the washer-
dryer turning the knob will have no affect except when it is on the
RESET position.
Auxiliary Equipment Operation
23
Helpful Hints:
1. The washer features a water level sensor control system
that ensures the correct level of water is pumped into the
machine for the load size.
2. Use one of the "EXPRESS" wash cycles to wash smaller
loads of lightly soiled cotton heavy duty or permanent
press fabrics in less time.
3. The EASY IRON button uses specifi cally studied wash
motions to respect fabrics in the best possible way. During
the rinse phase, it introduces more water and the spin cycle
is shorter with a reduced speed, thus producing more
outstretched fabrics for easier ironing (See "Understanding
the control panel" for more information).