Ips Engines - Regal 42SC Owner's Manual

IPS ENGINES

It is important that you read the Volvo engine operator's
manual carefully and become completely familiar with the
operation as well as required maintenance procedures on
the engines and related IPS propulsion systems.
BEFORE STARTING IPS ENGINES
Before starting the engines check the guidelines below:
1.Open the engine hatch and sniff for fuel smells and vi-
sually check for fuel leaks. If diesel fuel is sensed or leaks
seen be sure to determine the cause and repair the source
before starting the engines. If you can not locate a diesel
fuel leak contact a marine professional immediately or your
closest Regal yacht dealer.
2. Remove any loose canvas and store in a dry location.
3. Shut and secure all hatches and doors.
4. Remove any debris from the engine water strainers
before turning on the seacock handle.
5. Ensure both engine seacocks are in the "open" position.
In the open position the handle is in line with the incom-
ing hose not perpendicular to it. In addition, open the IPS
stern drive sea cocks.
6. Make sure the swim ladder is secured in its folded posi-
tion and that the cover is in place.
7. Check fuel supply levels. Use the fuel "1/3" rule.
8. Turn all battery switches to the "on"position at the bat-
tery management panel.
9. Activate the VHF and listen for the latest weather
conditions.
10. Activate the plotter and radar checking their func-
tions.
Engine & Controls
11. Make sure all passengers are accounted for, seated and
their life jackets are properly fi tted.
12. Check for a balanced load.
13. Before disembarking make sure a person is aboard
who knows how to operate the vessel and is trained in
emergency procedures in case the captain would not be
able to carry out his duties.
14. Inspect the engine and drive oil levels. Add specifi ed
oil as required.
15. Check engine coolant levels. Add specifi ed coolant as
required.
AFTER STARTING IPS ENGINES
1. Allow the engines to idle for a short period as they warm
up. Never race a cold engine!
2.Check gauges for proper operation. Pay particular atten-
tion to volts, oil pressure and temperature display panel
functions as they are key indicators of a proper performing
engine. Also, check that no alarms are displayed and no
warning lights are fl ashing.
3. Open the engine compartment and listen to each engine
for unusual sounds.
4. Inspect the fuel, exhaust, and engine circulation system
for leaks.
5. Visually check the entire sump (bilge) for any unusual
conditions.
6. Visually check the through hull fi ttings for the proper
water output from components such the air conditioner
pumps and generator.
9