Engine And Components In Engine Compartment (From Above And Below): Perform Visual Check For Leaks And Damage - Volkswagen Golf 2004 Service Manual

Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
♦ Torque wrench -V.A.G 1783-
♦ Cordless power driver 12 V / 2.0 Ah -VAS 5826-
Removing
1 - Panel bolts, Qty. 8, torque setting 2 Nm.
2 - Combi-bolts, Qty. 3, torque setting 6 Nm.
– Remove bolts -arrows- with cordless power driver 12 V / 2.0
Ah -VAS 5826- .
– Remove noise insulation rearwards.
Installing
– Push noise insulation -3- into lock carrier -2- at bottom as
shown.
– The smaller lugs -arrow a- must be pushed in underneath and
the wider lugs -arrow b- must be pushed in over the edge of
lock carrier -2-.
– The retaining lugs on wider lugs must engage in holes of lock
carrier.
– Tighten bolts -arrows- to the correct torque setting.
4.28 Engine and components in engine com‐
partment (from above and below): Per‐
form visual check for leaks and damage
Perform visual check as follows:
– Check engine and components in engine compartment for
leaks and damage.
– Check lines, hoses and connections of
♦ Fuel system
♦ Cooling and heating system
♦ Lubrication system
♦ Air conditioning system
♦ Intake system
♦ and brake system
for leaks, abrasions, porosity and brittleness.
100
4. Descriptions of work