Volkswagen Golf 2004 Service Manual page 85

Golf 2004; golf plus 2005
Hide thumbs Also See for Golf 2004:
Table of Contents

Advertisement

– Remove air filter housing lower part -1- and air filter element
-2-.
Note
Observe disposal regulations!
– Clean air filter housing lower part.
– Insert new filter element -1- into air filter housing lower part
-2-.
Note
To secure the air filter housing upper part to air filter housing
lower part and intake connection, self-tapping bolts are used
as standard. If these bolts are loosened and tightened using
a cordless screwdriver, the thread in the air filter housing upper
part can be damaged.
For this reason it is only permitted to use a cordless screw‐
driver, if the following prerequisites are fulfilled:
♦ The speed of cordless screwdriver may be max. 200 rpm.
♦ A specified torque of max. 3 Nm must be adjustable.
– Tighten bolts -arrows- to max. 3 Nm.
Air filter version 2
Carry out the following procedure:
– Carefully pull off hose -1-.
– Loosen bolts of air filter housing upper part -2- and fold up‐
wards to remove the air filter -3-.
Note
Observe disposal regulations!
– Clean air filter housing.
– Install air filter and air filter housing in reverse order.
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4. Descriptions of work
81

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents