Volkswagen Golf 2004 Service Manual page 159

– Screw in new spark plugs using spark plug socket and exten‐
sion -3122 B- .
– Fit spark plug connectors using puller -T10112- .
– Fit connectors of injectors.
– Check if connectors of injectors, ignition cables and spark plug
connectors are seated securely.
– Install engine cover again.
4.56.6 Renewing spark plugs: 1.4 and 1.6 l pet‐
rol direct injection engines
Carry out the following procedure:
– Remove engine cover
– Place Puller -T10094 A- on ignition coil with output stage
-arrow-.
– Slightly pull out ignition coil with output stage.
– Fit assembly tool -T10118- as illustrated.
– Release connection locking device carefully and pull off con‐
nector.
– Pull out ignition coil with output stage.
– Unscrew spark plug using spark plug wrench -3122 B- .
– Screw in new spark plugs using spark plug socket and exten‐
sion -3122 B- .
Note
Spark plug designation and specified torque: "Power unit" ⇒
♦
Power unit; Rep. Gr. 28 ; Test data, spark plugs "Test data,
spark plugs".
Observe disposal regulations!
♦
⇒ page 89 .
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4. Descriptions of work
155