Volkswagen Golf 2004 Service Manual page 167

– Select "with OBD", -arrow-.
Specified data input for EET:
Note
If specifications are not available as bar code, they are to be
♦
entered manually.
All test conditions and data required for exhaust emissions
♦
test, see ⇒ Data sheets for exhaust emission test for respec‐
tive engine.
Manual specified data input for EET:
– Perform manual data input according to instructions on dis‐
play.
– Enter displayed values on EET data sheet in column "Test
values for exhaust emissions test" on display as follows:
1 - Test speed (idling speed)
2 - Warm-up phase for catalytic converter
3 - Engine temperature
4 - Increased idling speed
5 - CO content at increased idling speed
6 - Lambda at increased idling speed
7 - Idling speed
8 - Select regulating probe type, either "Step-type probe" or
"Broad-band probe" -item 1-.
9 - Lambda probe value
– When all data have been entered properly, press
button -arrow-.
Specified data input for EET as bar code:
– If specified data for EET are available as bar code, read bar
code of EET data sheet with bar code reader.
All data required are shown on display.
– Press button -arrow- to continue procedure.
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
Continue
163
5. Exhaust emissions test