Engine Cover -Top-: Removing And Installing - Volkswagen Golf 2004 Service Manual

– Remove air filter housing upper part and air filter element -1-.
Note
Observe disposal regulations!
– Clean air filter housing lower part.
– Insert new air filter element and fit air filter housing upper part.
– Tighten air filter housing upper part with bolts -arrows- to 1.6
Nm ±0.2.
4.26 Engine cover -top-: Removing and in‐
stalling
Caution
♦ Do not push with the fist or a tool on the engine cover when
it is installed or engaged at securing points. It could be
damaged.
Removing and installing engine cover: 1.4 l and 1.6 l FSI petrol
direct injection engines
Removing and installing engine cover: 1.4 l injection engines
⇒ page 91 .
Removing and installing engine cover: 1.4 l TSI engines
⇒ page 92 .
Removing and installing engine cover: 1.6 l injection engines
⇒ page 93 .
Removing and installing engine cover: 2.0 l TFSI petrol direct in‐
jection engines ⇒ page 93
Removing and installing engine cover: 2.0 l FSI petrol direct in‐
jection engines ⇒ page 95
Removing and installing engine cover: 2.0 l TSI engine
⇒ page 96
Removing and installing engine cover: 2.5 l petrol injection en‐
gines ⇒ page 96 .
Removing and installing engine cover: 1.9 l PD diesel engines
⇒ page 97 .
Removing and installing engine cover: 2.0 l PD diesel engines
⇒ page 99 .
⇒ page 90 .
.
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4. Descriptions of work
89