Volkswagen Golf 2004 Service Manual page 90

Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
– Lift air filter housing lower part -1- upwards in direction of arrow
and remove.
– Remove air filter element -1- from air filter housing lower part
-2-.
– Blow out air filter housing with compressed air if necessary.
Installing
– Insert air filter element -1- into air filter housing lower part -2-.
Note
Ensure that sealing surfaces of air filter housing are properly
seated.
Note
For attaching the air filter housing upper part onto air filter
♦
housing lower part and intake connection, self-tapping bolts
must be used as standard. When loosening or tightening these
bolts using a power screwdriver, the thread in air filter housing
upper part could be damaged.
For this reason it is only permitted to use a power screwdriver,
♦
if the following prerequisites are fulfilled:
The speed of power screwdriver must be max. 200 rpm.
♦
Setting torque of max. 2 Nm must be adjustable.
♦
– Hook air filter lower part -1- on retaining lugs -arrows- of air
filter upper part -2- and swing in direction of arrow, then press
on lightly.
Check if parts of housing -1- and -2- are flush (rear part)
86
4. Descriptions of work