Brake System And Shock Absorbers: Perform Visual Check For Leaks And Damage - Volkswagen Golf 2004 Service Manual

Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4.10.1 Brake fluid level (dependent upon lining/
pad wear): Check
Brake fluid level at delivery inspection:
– For delivery inspection, fluid must be at MAX. marking -1-.
Note
In order that brake fluid does not overflow the reservoir, MAX
marking -1- must not be exceeded.
Brake fluid level at inspection service:
The fluid level must always be judged in conjunction with lining/
pad wear.
When vehicle is in use, fluid level tends to drop slightly due to
lining/pad wear and automatic adjustment.
• Recommended brake fluid level, if brake pads are almost at
wear limit:
"At MIN. marking or just above" -2-, "REPLENISHING IS NOT
REQUIRED".
• Recommended brake fluid level when brake pads are new or
well within wear limit:
"Between MIN. and MAX. marking".
4.11 Brake system and shock absorbers:
Perform visual check for leaks and dam‐
age
Check following components for leaks and damage:
♦ Brake master cylinder
♦ Brake servo (for anti-lock brake system: hydraulic unit)
♦ Brake pressure regulator and
♦ Brake calipers
♦ Presence of dust caps on brake fluid bleeder valves
– Ensure that brake hoses are not twisted.
– Ensure that brake hoses do not touch any vehicle components
when steering is at full lock.
– Check brake hoses for porosity or brittleness.
– Check brake hoses and lines for chafing.
– Check brake connections and fastenings for correct seating,
leaks and corrosion.
58
4. Descriptions of work