4.28
Engine and components in engine com‐
partment (from above and below): Per‐
form visual check for leaks and damage
Perform visual check as follows:
– Check engine and components in engine compartment for
leaks and damage.
– Check lines, hoses and connections of
♦ Fuel system
♦ Cooling and heating system
♦ And brake system
for leaks, abrasions, porosity and brittleness.
Note
Arrange for defects to be rectified as repair measures.
♦
If fluid loss is greater than can be expected through normal
♦
use, determine source and rectify (repair measure).
4.29
Engine cover -top-: Removing and in‐
stalling
Caution
♦ Do not push with the fist or a tool on the engine cover when
it is installed or engaged at securing points, it could be
damaged.
Removing and installing engine cover, 1.4 l petrol injection en‐
gines
⇒ page 106
.
Removing and installing engine cover, 1.4 l TSI engines (90 kW)
⇒ page 106
.
Removing and installing engine cover, 1.4 l TSI engines (103 kW,
125 kW)
⇒ page 107
.
Removing and installing engine cover, 1.4 l TSI engines (118 kW)
⇒ page 108
.
Removing and installing engine cover, 1.6 l FSI engines
⇒ page 108
.
Removing and installing engine cover, 1.8 l TSI and 2.0 l TSI pet‐
rol direct injection engines
Removing and installing engine cover, 2.0 l TFSI engines
⇒ page 110
.
Removing and installing engine cover, 2.0l FSI engines
⇒ page 110
.
Removing and installing engine cover, 1.6 l petrol injection en‐
gines
⇒ page 110
.
Removing and installing engine cover, 2.5l petrol injection en‐
gines
⇒ page 111
.
Removing and installing engine cover, 1.9 l PD diesel engines
⇒ page 113
.
Golf Variant 2007 ➤ , Golf Variant 2010 ➤ , Jetta 2005 ➤
⇒ page 109
.
Maintenance - Edition 09.2009
4. Descriptions of work
105