Volkswagen Golf 2004 Service Manual page 158

Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
– Unscrew spark plugs using spark plug socket and extension
-3122 B- .
Installing
– Screw in new spark plugs using spark plug wrench -3122 B-
and tighten to 20 Nm.
– Insert ignition coils with output stages in cylinder head and
align ignition coils in respective recesses of cylinder head cov‐
er.
– Push ignition coils with output stages onto spark plugs until
stop, they must be felt to engage.
– Connect connector onto exhaust recirculation valve until it no‐
ticeably engages.
Note
Ensure that the cable guide for ignition coils with output stages is
routed correctly.
– Install engine cover
4.56.5 Renewing spark plugs: 1.6 l injection en‐
gine and Flex Fuel engine
Carry out the following procedure:
– Remove engine cover, if fitted
Removing:
– Pull off injector connectors of first and fourth cylinder.
– Pull off spark plug connector with Puller -T10112- .
– Remove spark plug with spark plug socket and extension
-3122 B- .
Note
Spark plug designation and specified torque: "Power unit" ⇒
♦
Power unit; Rep. Gr. 28 ; Test data, spark plugs "Test data,
spark plugs".
Observe disposal regulations!
♦
Installing:
154
4. Descriptions of work
⇒ page 89 .
⇒ page 89 .