– Before removing ignition coils with output stage observe fitting
position to the connectors -arrows-.
The flat side of the connector must align with the flat side of igni‐
tion coil with final output stage.
– Unscrew spark plugs using spark plug socket and extension -
VAS 3122B- .
Note
Spark plug designation and specified torque: "Power unit" ⇒
♦
Power unit; Rep. Gr. 28 ; Test data, spark plugs "Test data,
spark plugs".
Observe disposal regulations!
♦
Installing
– Screw in new spark plugs using spark plug socket and exten‐
sion -VAS 3122B- .
– Carefully set ignition coils with final output stage onto spark
plugs by hand so that the flat sides of connectors align
-arrows-.
– Connect ignition coil connectors 1...6 with final output stage.
4.56.2
Renewing spark plugs: 1.4 l injection en‐
gine
Removing
– Remove engine cover
⇒ page 89
.
Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
4. Descriptions of work
149