Volkswagen Golf 2004 Service Manual page 112

Golf 2004 ➤ , Golf Plus 2005 ➤
Maintenance - Edition 11.2009
Installing
– Oil rubber seal lightly on new filter.
– Screw in filter and tighten hand-tight.
The remaining assembly steps are basically a reverse of the dis‐
mantling procedure.
4.30.7 Renewing oil filter: 2.5 l petrol injection
engines, 2.0 l FSI and 2.0 l TFSI engines
Special tools and workshop equipment required
♦ Oil drain adapter -T40057-
♦ Oil filter tool -VAS 3417-
♦ Torque wrench -V.A.G 1331/-
Perform the following procedure:
– Remove dust cap -arrow- from oil filter housing.
Before removing the oil filter housing, it must be drained.
108
4. Descriptions of work