6. Connect one end of the MCCATʹs power cord to its power jack and
7. Power on the monitor, connected computer(s) and the MCCAT unit.
Selecting a Channel
After finishing the hardware installation, try to access one or more
channels to verify the connections. Use one of the following to access
channels:
•
•
Note: If you establish a two‐tier MCCAT system, the only way to access the
second‐tier channels is through the OSD. For more information, see Chapter 5:
Two‐Tier System (on page 32).
Front Panel Operation
Press the channel button whose number corresponds to the channel you
want to access. The video of the accessed channel appears on the screen
and you can control the computer with the keyboard and mouse attached
to the MCCAT unit.
the other end to the appropriate power outlet.
Front panel buttons
OSD
Chapter 2: Quick Start
9