Chapter 4: Ip-Reach M1, M2, Tr364 And Ust-Ip Installation And Configuration; Ip-Reach Installation And Physical Connection; Figure 10 Back Panel Of The Ip-Reach M2 Model; Figure 11 Back Panel Of The Ip-Reach Tr 364 Model - Raritan Paragon II Deployment Manual

C 4: IP-R M1, M2, TR364
HAPTER EACH
Chapter 4: IP-Reach M1, M2, TR364 and UST-IP
Installation and Configuration
The following outlines initial configuration of IP-Reach models M1, M2, and TR364, and the
UST-IP in order to ready them for Paragon II and CommandCenter Integration.

IP-Reach Installation and Physical Connection

1. Connect the included AC power cord to the IP-Reach Unit and plug it into an AC power
outlet.
2. Attach a PS/2 keyboard and multi-sync monitor to the corresponding Local Admin Console
ports on the rear panel of the IP-Reach unit.
3. Power ON the IP-Reach.
UST-IP I
AND NSTALLATION AND

Figure 10 Back Panel Of The IP-Reach M2 Model

Figure 11 Back Panel Of The IP-Reach TR 364 Model

C
ONFIGURATION
17