Alarm Settings; Common Alarm Settings; Push Button Alarm; Test Alarm - ASCOM i62 Configuration Manual

Configuration Manual
Ascom i62 VoWiFi Handset
6.8

Alarm Settings

Note: Applicable to Protector only.
The following alarm types can be configured; Push-button alarm, Test alarm, Emergency call
alarm, Man-down and No-movement alarm.
6.8.1

Common Alarm Settings

These settings are common for all alarms sent from the VoWiFi Handset.
1 Select Alarm > Common.
2 In the Stored alarm data field, enter data to be sent along with an alarm (optional).
3 In the Indicate initiated Alarm drop-down list, select one of the following:
• On - The VoWiFi Handset will beep and the LED will flash twice when an alarm is
initiated.
• Off - The VoWiFi Handset will not indicate when an alarm is initiated.
4 In the Disable backlight during alarm drop-down list, select one of the following:
• Yes - The display backlight will be left unchanged for 30 seconds after alarm
• No - The display will light up after an alarm.
6.8.2

Push Button Alarm

1 Select "Alarm".
2 Select "Multiple-press" or "Long-press".
3 In the Alarm type for multiple press drop-down list or Alarm type for longpress drop-
down list, select "Push button alarm 1".
4 In the Number for automatic call after alarm field, enter the number to be called after
an alarm has been activated (optional).
5 In the ALS drop-down list, select "Yes" if an Acoustic Location Signal shall sound
when the alarm has been activated.
6 In the Text indication for alarm on multiple press field or Text indication for alarm on
long press, enter the text to be displayed in the VoWiFi Handset when the alarm has
been activated.
7 In the Mode for automatic call after alarm drop-down list, select one of the following:
• Monitor - The loudspeaker is muted and the microphone is on.
• Loudspeaker - The loudspeaker is turned on.
• Ordinary - The loudspeaker is turned off.
6.8.3

Test Alarm

1 Select "Alarm".
2 Select "Multiple-press" or "Long-press".
3 In the Alarm type for multiple press drop-down list or Alarm type for longpress drop-
down list, select "Test alarm".
4 In the Number for automatic call after alarm field, enter the number to be called after
an alarm has been activated (optional).
5 In the ALS drop-down list, select "Yes" if an Acoustic Location Signal shall sound
when the alarm has been activated.
9 December 2011/ Ver. D
TD 92675EN
46