802.1X With Eap-Fast; 802.1X With Peap-Mschapv2; Eap-Tls; Handset Settings - ASCOM i62 Configuration Manual

Configuration Manual
Ascom i62 VoWiFi Handset
6.4.4

802.1X with EAP-FAST

To select EAP-FAST as the authentication method. Do the following:
1 Select Network > Network A (B, C, or D).
2 In the Security mode drop-down list., select "EAP-FAST".
3 In the EAP authentication user name field, enter the user name for EAP
authentication.
4 In the EAP authentication password field, enter the password for EAP authentication.
6.4.5

802.1X with PEAP-MSCHAPv2

Select PEAP-MSCHAPv2 if root certificate is to be used for authentication. To select PEAP-
MSCHAPv2 as the authentication method. Do the following:
1 Ensure that the VoWiFi Handset is online in PDM.
2 Import the root certificate by do the following:
• In the Numbers tab, right-click the VoWiFi Handset's number and select "Edit
certificates". An Edit certificate window opens.
• In the Root tab, click "Edit" and select the root certificates to import. Click "Close".
3 Select Network > Network A (B, C, or D)
4 In the Security mode drop-down list, select "PEAP-MSCHAPv2".
5 In the EAP authentication user name field, enter the user name for EAP
authentication.
6 In the EAP authentication password field, enter the password for EAP authentication.
6.4.6

EAP-TLS

Select EAP-TLS if a client certificate is to be used for authentication. To select EAP-TLS as the
authentication method, do the following:
1 Ensure that the VoWiFi Handset is online in PDM.
2 Import the certificate by do the following:
• In the Numbers tab, right-click the VoWiFi Handset's number and select "Edit
certificates". An Edit certificate window opens.
• In the Root tab and Client tab, click "Edit" and select the certificates to import.
Click "Close".
3 Select Network > Network A (B, C, or D).
4 In the Security mode drop-down list, select "EAP-TLS".
5 In the EAP client certificate drop-down list, select the client certificate to use.
6.5

Handset Settings

This section describes specific settings for the VoWiFi Handset that can be changed using
the keypad on the VoWiFi Handset, and/or can be set in the PDM/IMS3 to assist the user or
to set the initial value when the VoWiFi Handset is commissioned.
General Settings
6.5.1 Automatic keylock
6.5.2 Phone lock
9 December 2011/ Ver. D
on page 35
on page 35
TD 92675EN
a
Keypad
PDM
x x
x x
33