Presence Management; Location - ASCOM i62 Configuration Manual

Configuration Manual
Ascom i62 VoWiFi Handset
• The group number to the PTT group (defined in the IMS3).
• The phone number to the conference bridge.
Tip: For more information about the PTT function, see also Function Description, Ascom
VoWiFi System, TD 92314EN or User Manual, Ascom i62 VoWiFi Handset, TD 92599EN.
Note: If Music on Hold (MOH) is used in the system it can effect an ongoing PTT group call. If
someone in the group conference answers another incoming call, MOH will be played for the
whole group.
1 Select Push-To-Talk > X (where X represents 1-10).
2 In the Session name field, enter a name to identify the PTT session.
3 In the Group number field, enter the number to the PTT conference group.
4 In the Display text field, enter a text to be shown in the display during the PTT
session.
5 In the PTT session signal drop-down list, select the indication of the PTT session.
6 In the Conference number field, enter the phone number to the conference bridge.
7 In the Answer mode drop-down list, select the answer mode for the PTT session.
8 In the Speaker mode drop-down list, select the speaker mode for the PTT session.
9 A Service must be configured to access the PTT session from the VoWiFi Handset. If
not configured, continue with

6.14 Presence Management

To be able to configure presence management, the following must be known:
• The IP address to the Presence Management system.
• The user name and password used in the Presence Management system for each VoWiFi
Handset.
For more information about presence management, see Function Description, Ascom VoWiFi
System, TD 92314EN or User Manual, Ascom i62 VoWiFi Handset, TD 92599EN.
1 Select Presence > Common.
2 In the Presence Management system drop-down list, select presence management
system.
3 Select "Presence" and the presence management system selected in previous step.
4 In the IP address field, enter the IP address to the presence management system.
5 In the Listening port field, enter the port number the presence management system
shall listen to.
6 In the user name field, enter the Enter the user name.
7 In the password field, enter the password.
If the Presence function is configured, it will be visible under Call > Presence in the VoWiFi
Handset. It is also possible to configure a shortcut in order to access the Presence menu, see
6.5.13 Shortcuts

6.15 Location

Two types of location are supported, either a basic location solution that gives an
approximate location using Access Point (AP) location, or a personal security solution that
9 December 2011/ Ver. D
6.12.2
on page 39.
Services.
TD 92675EN
54