ASCOM i62 Configuration Manual page 46

Configuration Manual
Ascom i62 VoWiFi Handset
2 In the Name field, enter the name of the soft key to be displayed in the VoWiFi
Handset.
3 Continue with
Configure Navigation Key
1 Select Shotcuts > Navigation Key X (where X is Up, Down, Left, or Right)
2 Continue with
Configure Multi-function Button
1 Select Shotcuts > Multi-function Button X (where X is Longpress or Multipress)
2 Continue with
Additional Shortcut Settings
1 In the Function drop-down list, select the function to be used:
• Phone call
• Call List
• Contact list
• Central phonebook (system dependent feature)
• Message inbox
• Send a message
• Change profile (if selecting profile 1-4, the profile must first be configured, see
6.5.6 Configure Profiles
• Open a menu
• Services
• Logout (applicable for the license dependent Shared Phone feature)
• Presence
• Call diversions
• RSSI measurement
2 In the Value field, enter the applicable value. This is mandatory when using Phone call
function.
3 In the Control Question drop-down list, select "Enable" if the Proceed? window shall
be displayed after the key is pressed. This is used to avoid that a function is accessed
by mistake.
4 In the Read Only drop-down list, select "True" if the user shall not be able to change
the shortcut.
5 Right in call soft key name field, enter the name of the soft key to be displayed
during a call.
6 In the Right in call soft key action drop-down list, select one of the following
functions:
• Conference
• Contacts
• Disabled
• End Call
• Hold
• Loudspeaker
• New call (put active on hold)
• Retrieve
• Switch
• Transfer (to held call)
• Transfer to new call (blind transfer)
9 December 2011/ Ver. D
Additional Shortcut Settings
Additional Shortcut Settings
1
Additional Shortcut Settings
on page 37.)
on page 40.
on page 40.
on page 40.
TD 92675EN
40