Examples Of Ttr/Ttp Settings - ASCOM i62 Configuration Manual

Configuration Manual
Ascom i62 VoWiFi Handset
• IM option mode
This parameter is used for older applications and sets that three soft keys shall be placed
automatically, i.e. on softkeys or in an option menu (list).
6.7.1

Examples of TTR/TTP settings

Example 1
This example describes the message handling with the following message settings:
• TTP= Prioritize forever
• TTR= Close manually
Tip: It is recommended to use these settings if messages with the highest priority always
shall be displayed until the user closes the current message.
Prio 7
14:04
Figure 4. Describing how queing and prioritizing for messages with equal messages
In figure 4, a message with priority 2 is received at 13:59 and is displayed in the VoWiFi
Handset. Another message with equal priority is received at 14:02 and will be placed in the
queue. If no messages with higher priority are received, the user needs to close the current
displayed message to show the next message in the queue. In this case, the message
received at 14:02. The closed message will be indicated as a read message in the Messaging
Inbox.
Example 2
This example describes the message handling with the following message settings:
• TTP= 20 seconds
• TTR= Close manually
9 December 2011/ Ver. D
New messages
Prio 7
14:04
Prio 4
14:03
Prio 2
14:02
Prio 2
13:59
Prio 4
14:03
Prio 4
13:58 Prio 2
Prio 2 13:59
14:02
4. Figure
works
Prio 7
14:04
Prio 4
14:03
Prio 4
13:58
The user closes
the message
TD 92675EN
Prio 2
14:02
43