Configuration Manual
Ascom i62 VoWiFi Handset
6.12 Menu Operation
6.12.1 Hide Menu Items
It is possible to hide menu items for the users. To hide or show a menu item, do the
following:
1
Select Customization > Visibility.
2
Select "Hide", "Show", or "Read only" for the applicable menu item in the drop-down
list. If "Read only" is selected, the menu item will be visible in the VoWiFi Handset, but
cannot be edited by the user. The following items can be hidden:
• Connections (Network, Headset etc.)
• Calls
• Contacts
• Shortcuts (Soft keys, Hot keys etc.)
• Messaging
• Services
• Profiles
• Settings (Sounds, Display, Language etc)
6.12.2 Services
Note: Applicable to Messenger and Protector only.
It is possible to configure up to ten services that can be accessed from the VoWiFi Handset's
Services menu.
1
Select "Services".
2
Select between 1 - 10.
3
In the Service name, enter the name of the service to be displayed in the VoWiFi
Handset's Service menu.
4
Select the service to be used:
• Phone Call
• Send a message to predefined number (prompt for the message text)
• Send data to message service centre (predefined data and/or prompt for the
data)
• Edit alarm data
• PTT
5
In the Service user data field, enter the data to be sent/dialed when using the
service. Note: This field is not applicable for PTT.
6
In the Service prefix for user data field, enter the prefix for the service user data (if
needed).
7
In the Service index field, enter the corresponding index used for PTT. For example, if
PTT group 1 is configured (located under Push-To-Talk > 1), the service index must
be set to 1. Note: This field is only applicable for PTT.
If the PTT is not configured, continue, with
Tip: It is also possible to configure soft keys to reach services quickly, see
on page 39.
6.13 Push-To-Talk (PTT) Group Call
To be able to configure a PTT session, the following must be known:
9 December 2011/ Ver. D
6.13 Push-To-Talk (PTT) Group
6.5.13 Shortcuts
TD 92675EN
Call.
53
Need help?
Do you have a question about the i62 and is the answer not in the manual?