Ip Address To The Ims3; Messaging Settings - ASCOM i62 Configuration Manual

Configuration Manual
Ascom i62 VoWiFi Handset
6.6.1

IP Address to the IMS3

The IMS3 handles all communication between the WLAN and its built-in Centralised Device
Manager. It is possible to send messages from a web browser to a VoWiFi Handset, handle
messages to groups, send simple messages from VoWiFi Handset to VoWiFi Handset (and to
groups), search for telephone numbers in a central database (on PC), have a central
telephone book on the IMS3 (not PC-based) and to have absence handling in the system.
1 Select Device > Unite.
2 In the IP address field, enter the IP address of the IMS3. If left empty, no messaging or
alarm function will be available.
6.7

Messaging Settings

Note: Applicable to Messenger and Protector only.
It is possible to configure how incomming messages shall be indicated and displayed in
VoWiFi Handset.
Profiles > Normal, Profile 1- 4
• Vibrator
Determines if the VoWiFi Handset shall vibrate when receiving incoming calls and
messages.
• Message alert
Determines the message sound for incoming messages.
• Message volume
Determines the message volume for incoming messages. By default, the message
volume follows the ringer volume, but another message volume can be set with this
parameter.
Device > Messaging
• Message list representation
Can be set to text or number.
• Time to read (TTR)
Determines if the user needs to close a message manually, or if the message
automatically shall be closed when TTR expires. Regardsless how a message is closed, it
is removed from the message queue and stored in the Messaging Inbox. TTR starts when
a message is displayed and keep running also when the message is placed in the
messaging queue. If a user presses any key when a message is displayed, the TTR is
reset. See also
• Time to prioritize (TTP)
Determines how long messages shall keep their priority status. The TTP starts when a
message is displayed. If a user presses any key when a message is displayed, the TTP is
reset. If receiving a message with higher priority than the displayed message, the
message with lower priority is placed in queue and its TTP is paused. When the TTP
elapsed for a message, it is put last in the queue. See also
settings
• Repeat message indication
This parameter enables/disables message indications. It sets whether a message
indication shall be repeated until confirmed by the user or not. The current repetition
rate is 7 seconds. If the message itself contains a repetition, it overrides this setting.
• Vibrator for message during call
Determines if the handset shall vibrate when receiving messages during an ongoing call.
9 December 2011/ Ver. D
6.7.1 Examples of TTR/TTP settings
on page 43.
on page 43.
6.7.1 Examples of TTR/TTP
TD 92675EN
42