Switching Cutting Operation - Brother RH-9820 Instruction Manual

5-5. Switching cutting operation

Cutting before sewing
Sewing is carried out after cutting has been
carried out.
Press the BEFORE or AFTER key during the standby condition in automatic mode, test mode or manual mode.
The cutting operation changes as shown in the illustration each time a key is pressed.
5. USING THE SEWING MACHINE (OPERATION PANEL: BASIC OPERATION)
No cutting
Cutting operations are not carried out.
When cutting before sewing is
selected, the cutting before
sewing indicator illuminates.
When "No cutting" is selected, the
cutting before sewing indicator and
the cutting after sewing indicator will
both switch off.
Cutting after sewing
Cutting is carried out after sewing has been
carried out.
RH-9820
When cutting after sewing is
selected, the cutting after sewing
indicator illuminates.
0310B
0425B
0308B
0309B
48