Brother RH-9820 Instruction Manual page 30

3. INSTALLATION
6. Close the cord presser plate (9) in the direction of the arrow, and secure it by tightening the two screws (10).
NOTE:
Make some slack in the cords outside the control box so that the cords do not get pulled too tightly inside the control box.
Securely close the cord presser plate (9). If dust gets inside the control box, it may cause problems with operation.
7. Check that the cords do not get pulled, and then gently return the machine head to its original position.
21
RH-9820
0368B