Displaying The Help Screen - Brother RH-9820 Instruction Manual

7-5. Displaying the help screen

The help screen is a screen which uses graphics to show how to switch the sewing machine to data initialization mode,
memory switch setting mode and production counter setting mode. (Refer to the table below for details.)
1
Press the F key while the sewing machine is in standby during automatic mode, test mode, manual mode, program mode
or cycle program mode.
0452B
2
When the F key is released, the display will return to the normal display.
NOTE:
If the F key has been assigned as a shortcut key by changing the memory switch settings, it will not be possible to display
the help screen. To display the help screen, change the setting for memory switch No. 300 to OFF. (Refer to "7-2. Setting
memory switches".)
Meaning of help screen symbols
Symbol
0304B
0305B
0306B
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVENCED OPERATION)
Meaning
How to switch to data initialization
mode
How to switch to memory switch
setting mode
How to switch to production counter
setting mode
RH-9820
* The help screen will be displayed while the F key is being
pressed.
While holding down the RESET key, push
the POWER switch to the ON side.
While holding down the PROGRAM key,
push the POWER switch to the ON side.
While the sewing machine is at standby in
automatic mode, hold down the ENTER key
and press the
Operation method
key.
0303B
64