Connecting The Ground Wire - Brother RH-9820 Instruction Manual

Electronic eyelet button holer
Hide thumbs Also See for RH-9820:
Table of Contents

Advertisement

3-14-2. Connecting the ground wire

Be sure to connect the ground.
If the ground connection is not secure, you run a high risk of receiving a serious electric shock, and problems with
correct operation may also occur.
(1) Ground wire from upper shaft motor harness
(2) Ground wire from the machine head
(3) Ground wire from foot switch conversion harness of 2-pedal foot switch (when using 2-pedal foot switch)
NOTE:
Make sure that the ground connections are secure in order to ensure safety.
CAUTION
0336B
RH-9820
3. INSTALLATION
Secure the cover (5) of the control box
(4) by tightening the eight screws (6).
Check that the cords are not clamped
by the cover at this time.
<For European destinations>
For European destinations, there are
other ground wire connection locations
in addition to those mentioned above.
Refer to the CE instruction manual for
further details.
0369B
22

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents