Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
SEWING BASICS
g
After 3 to 5 reverse stitches have been sewn,
release
(Reverse/reinforcement stitch
button).
The machine stops sewing.
h
Press
(Start/stop button), or press down on
the foot controller.
At this time, if
(Start/stop button) is held
down, the machine sews at a slow speed.
The machine starts sewing in the normal
sewing direction.
i
After sewing to the end of the stitching, the
sewing machine stops.
Release
(Start/stop button) or foot
controller.
3
4
a Beginning of stitching
b End of stitching
■ Sewing stitches
Reverse stitches are preset for the
stitches.
When
(Reverse/reinforcement stitch button)
is pressed with stitches other than these,
reinforcement stitches are used. Reinforcement
stitches are 3 to 5 stitches sewn on top of each
other in one place.
1
a Reverse stitching
b Reinforcement stitching
Memo
The sewing machine can be set to automatically
sew reverse or reinforcement stitches at the
beginning and end of the stitching. For details,
refer to "Automatically sewing reverse/
reinforcement stitches" (page 61).
56
1
1
2
5
6
2
1
3
7
and
2
Cutting the thread
When you have finished sewing, cut the threads.
■ Using the thread cutter button
a
When you wish to finish the stitching, press
(Thread cutter button) once.
a Thread cutter button
The threads are cut and the needle is raised.
b
Raise the presser foot lever, then remove the
fabric.
a Presser foot lever
CAUTION
● Do not press
after threads have already been cut,
otherwise the needle may break, the
threads may become tangled or damage
to the machine may occur.
● Do not press
(Thread cutter button) if
there is no fabric under the presser foot or
while the machine is sewing, otherwise
damage to the machine may occur.
Memo
The machine can be set so that the threads
will be cut when sewing is finished. For
details on setting the machine so that the
threads are cut automatically, refer to
"Automatically cutting the thread" (page
62).
1
a
(Thread cutter button)
Advertisement
Table of Contents
