Brother RH-9820 Instruction Manual page 29

<Power supply motor P.C. board>
<PMD P.C. board>
NOTE:
Route the X-feed, Y-feed and -feed motor harnesses so that they do not touch the PMD P.C. board.
Connectors
Machine head memory 7-pin
Upper shaft motor 3-pin
Synchronizer 14-pin
Connectors
-feed motor 4-pin black
(Gimp clamp, lower tension release) solenoid
6-pin
Upper tension release solenoid 4-pin
Y-feed motor 4-pin blue
X-feed motor 4-pin white
*:
Be sure to make the ground connection.
(Refer to "3-14-2. Connecting the ground wire".)
At power supply motor
P.C. board
Insertion location
P3 (HEAD-M)
P4 (UVW)
P5 (SYNC)
At PMD P.C. board
Insertion location
P3 (PPM)
P6 (SOL1)
P7 (SOL2)
P8 (YPM)
P10 (XPM)
RH-9820
3. INSTALLATION
<Removal>
Press the
tabs.
<Securing method>
Cord clamp
(6)
(7)
(7), (8)
Cord clamp
(7), (8)
(7), (8)
(7), (8)
(7), (8)
(7), (8)
0367B
(Continued on next page)
20