Using The Stop Switch; Pausing Sewing During Automatic Sewing - Brother RH-9820 Instruction Manual

Electronic eyelet button holer
Hide thumbs Also See for RH-9820:
Table of Contents

Advertisement

5
Press the start switch (6).
0420B
6
To repeat the sewing operation, repeat steps 4 and 5 above.

6-2. Using the STOP switch

6-2-1. Pausing sewing during automatic sewing

The STOP switch is used to stop the sewing machine if a problem occurs such as a thread breakage.
<Pausing sewing>
Press the STOP switch (1) while sewing is being carried out.
0436B
<Clearing the pause (when not continuing from the point where sewing was paused)>
1
Press the RESET key.
0437B
2
Eliminate the cause of the problem.
3
Press the RESET key once more.
0392B
Sewing will then start.
*
When sewing is finished, the work clamps will be raised. In
addition, the production counter value appearing in the display will
increase by 1.
The buzzer will stop sounding.
After the home positions are detected, the needle bar and feed base will move to the
material setting position.
RH-9820
6. USING THE SEWING MACHINE (SEWING OPERATION)
The sewing machine will stop and the buzzer will sound.
(The display will change alternately.)
0320B
0438B
52

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents